RUMCars Forum

General Category => Unusual Microcar Discussion => Topic started by: trojan200 on May 15, 2011, 11:58:03 AM

Title: help for fuldamobil
Post by: trojan200 on May 15, 2011, 11:58:03 AM

someone has cut of front axle of my fuldamobil s4 and now i need help how that area off the frame where frontaxle is attached to frame should look.or even better if someone could give my measurements of that part.

Title: Re: help for fuldamobil
Post by: Jonathan Poll on May 15, 2011, 06:54:53 PM

Quote from: trojan200 on May 15, 2011, 11:58:03 AM

someone has cut of front axle of my fuldamobil s4 and now i need help how that area off the frame where frontaxle is attached to frame should look.or even better if someone could give my measurements of that part.

Hello,

  Is it the same as the Fulda S7? If so, I can measure some of my Nobel if you want.

Jonathan

Title: Re: help for fuldamobil
Post by: blob on May 15, 2011, 11:14:54 PM

I'm fairly certain the S4 is similar to the S2 and the piece you've indicated is where the front leaf spring sits, as can be seen here: http://www.fuldamobil.de/Fanseite.htm

Check the www.fuldamobil.de guestbook or follow the S4 owners page for futher info.