RUMCars Forum

General Category => Unusual Microcar Discussion => Topic started by: richard on July 18, 2013, 09:47:57 PM

Title: wiring ring terminals ?
Post by: richard on July 18, 2013, 09:47:57 PM
having tried all sorts does anyone have a dozen or so small terminals as pictured ( original set up ) . anything modern i have found ,to fit the 4ba screw , is too bulky as you see i have to fit 3 terminals to 2 of the screws . again they need to look correct , ideally uninsulated and be compact enough . ideas ?
Title: Re: wiring ring terminals ?
Post by: Rusty Chrome (Malcolm Parker) on July 18, 2013, 10:06:00 PM
These guys do a fair assortment.

http://www.autoelectricsupplies.co.uk/product_list/2 (http://www.autoelectricsupplies.co.uk/product_list/2)
Title: Re: wiring ring terminals ?
Post by: richard on July 18, 2013, 10:41:10 PM
Looking good many thanks - sounds easy but I assure you it hasn't been so far
Title: Re: wiring ring terminals ?
Post by: Rusty Chrome (Malcolm Parker) on July 18, 2013, 11:06:24 PM
They can be akward buggers. This site offers some that have a longer neck (F) for a 4.3mm hole, but may be trade only. Possibly worth a call.

http://www.cablecraft.co.uk/catalog/product/view/id/8223/ (http://www.cablecraft.co.uk/catalog/product/view/id/8223/)

http://www.cablecraft.co.uk/connect/cablecraft-ctt-crimping-solutions/uninsulated-crimp-terminals/uninsulated-ring-terminals.html (http://www.cablecraft.co.uk/connect/cablecraft-ctt-crimping-solutions/uninsulated-crimp-terminals/uninsulated-ring-terminals.html)
Title: Re: wiring ring terminals ?
Post by: richard on July 19, 2013, 12:56:49 PM
have ordered from the first one looks promising but cannot tell how slim they are until they arrive - i have done this before . thanks for that tip . the longer ones would surely be more problematic in reaching across from one terminal to another . thanks
Title: Re: wiring ring terminals ?
Post by: richard on July 22, 2013, 07:41:37 PM
spent some time at the weekend filing out the ring terminals , bought from autoelectrics , to fit the 4BA terminal screws they sold  2,3 or 4 BA but they did not fit . quite annoying but after quite a bit of fiddly filing i have done the job . i will take it up with them anyway   
Title: Re: wiring ring terminals ?
Post by: Rusty Chrome (Malcolm Parker) on July 23, 2013, 12:24:19 AM
Glad you got it sorted in the end - I thought the longer ones might allow a bit more space between the wires, but I guess it depends where the bulky bit was. Looking forward to seeing the finished car.