RUMCars Forum

General Category => Off Topic Lounge => Topic started by: micro marshall on February 27, 2014, 11:52:53 AM

Title: Ginetta G26
Post by: micro marshall on February 27, 2014, 11:52:53 AM
 The last you heard of this car it had just come back form Wirrle (Liverpool). well it hasn't sat around derelict, now it has had allot of work done on it since then and we hope to have it on the road by May.
The scratches have been repaired and lots of new and original parts fitted, and the original rims have been sprayed gold. The only problem we have it that the timings are out really badly and so now it wont start and we don't have the tools to fix it.So if anyone knows a good call out mechanic in Kent please let me know.
Title: Re: Ginetta G26
Post by: Bob Purton on February 27, 2014, 01:43:53 PM
Ah maybe that's why you got it so cheap?
Isnt uncle Andrew your Kentish mobile mechanic? Cant he fix it?
Title: Re: Ginetta G26
Post by: micro marshall on February 27, 2014, 04:51:24 PM
It was running until we replaced the timing belt. :o ;)
uncle Andrew is very busy at the moment so he docent really want to get involved. :P ;D ;D
Title: Re: Ginetta G26
Post by: richard on February 27, 2014, 05:27:36 PM
WIRRAL ! WIRRAL ! WIRRAL ! And it's not Liverpool !
Title: Re: Ginetta G26
Post by: micro marshall on February 27, 2014, 06:09:50 PM
ha ha thank you richard :P ::) :o ;D ;D :D
Title: Re: Ginetta G26
Post by: Bob Purton on February 27, 2014, 06:12:52 PM
Yes anyway, the car you got from Liverpool where Richard lives ;)
So you got the timing belt back on in the wrong position? Oooo last time I did that I bent a valve.
Mind you if you are only a tooth out either way you should be ok. It may even be an engine that is designed in such a way that when the belt breaks the valves don't come into contact with the pistons. Which engine is it? Is it a Ford?
Title: Re: Ginetta G26
Post by: richard on February 27, 2014, 06:24:28 PM
if he gets it wrong again it'll be Jamie with a tooth out  ;D
Title: Re: Ginetta G26
Post by: micro marshall on February 27, 2014, 08:17:19 PM
Its a ford pinto. but we also know that the timings were out before we started, but we have spent 4 days trying to start it and now we are fed up wit it. So we have admitted defeat and so we are going to get someone in. ;D :D :o