Author Topic: Villiers exhaust pipe.  (Read 19889 times)

Bob Purton

  • Prolific Poster
  • *****
  • Posts: 5154
    • Inter microcar
Villiers exhaust pipe.
« on: August 22, 2012, 11:34:44 PM »
I'm still in need of a down pipe to fit a 9E, maybe from a Bond minicar/scootacar or a villiers powered motorcycle like a Francis Barnet, 1 3/4" diameter. Can anyone help please?

Jonathan Poll

  • Jonny One Nob
  • Prolific Poster
  • *****
  • Posts: 1135
  • Nobel 200 Anorak
    • Nobel 200 Restoration
Re: Villiers exhaust pipe.
« Reply #1 on: August 26, 2012, 10:37:26 PM »
I'm still in need of a down pipe to fit a 9E, maybe from a Bond minicar/scootacar or a villiers powered motorcycle like a Francis Barnet, 1 3/4" diameter. Can anyone help please?

What d you mean by downpipe? I have a front piece that goes onto the cylinder. I think I will use it on the mower though, but I may see if there is another way for me to make an exhaust, if so I'll let you know. I can lend it if you want a sample to make new maybe?

JP
Cars: Messerschmitt KR200, Nobel 200
Mopeds:
- Peugeot BB3SP, BB3T, BB3 "BITZA", BB VT, BB104,  TSA, Bima Luxe,
- Motobecane: 50V, M7 SL, 51 Club, EV50
- Other mopeds: Malaguti Superquattro, Solex 2200, Puch Monza, Puch Maxi

Bob Purton

  • Prolific Poster
  • *****
  • Posts: 5154
    • Inter microcar
Re: Villiers exhaust pipe.
« Reply #2 on: August 29, 2012, 09:47:08 AM »
Well, there are only two parts, the pipe and the silencer, its the pipe I'm in need of. There is small bore and large bore, the latter would be preferable but either would do. Someone must have one knocking around from a Bond, scootacar,villiers powered motorbike etc. any help much appreciated.

NickPoll

  • Quite Chatty
  • ****
  • Posts: 181
Re: Villiers exhaust pipe.
« Reply #3 on: August 29, 2012, 11:00:36 AM »
Hello Bob,
           In the past the Bond Club had them for sale. I'm not a member now, but maybe they still stock them. The spares bloke is Mike Hele in Waterlooville.               Nick.
Messerschmitt Tiger 500, KR201 roadster, 1955 KR200, 1958 KR200, 1959 KR200, 1964 KR200, Nobel 200, Morgan Super Sports, Goggo Coupe, Isetta 300, Velorex 350, Bond mk D, Lomax.

Bob Purton

  • Prolific Poster
  • *****
  • Posts: 5154
    • Inter microcar
Re: Villiers exhaust pipe.
« Reply #4 on: August 29, 2012, 11:53:41 AM »
Thanks Nick. I used to be a member as well, but no more.  I have contacted a member to inquire for me but no news yet.

Does anyone have a contact email or number for Mike Hele?
« Last Edit: August 29, 2012, 12:08:52 PM by Bob Purton »

NickPoll

  • Quite Chatty
  • ****
  • Posts: 181
Re: Villiers exhaust pipe.
« Reply #5 on: August 29, 2012, 01:33:15 PM »
Bob, All I remember for Mick Hele is he lives on the edge of a small village called Catherington, near Waterlooville, Hants. You might be able to find him with Directory Enquiries.                  Nick.
Messerschmitt Tiger 500, KR201 roadster, 1955 KR200, 1958 KR200, 1959 KR200, 1964 KR200, Nobel 200, Morgan Super Sports, Goggo Coupe, Isetta 300, Velorex 350, Bond mk D, Lomax.

Jean

  • Global Moderator
  • Prolific Poster
  • *****
  • Posts: 754
    • www.rumcars.org
Re: Villiers exhaust pipe.
« Reply #6 on: August 29, 2012, 06:36:53 PM »
Thanks Nick. I used to be a member as well, but no more.  I have contacted a member to inquire for me but no news yet.

Does anyone have a contact email or number for Mike Hele?
  Mike Hele 233 Catherington Lane, Waterlooville, Hampshire, PO8 0TB  Tel:02392 591212 e-mail: bondminicarbits@aol.com         From Bond Info magazine.  Jean
Jean
Register of Unusual Microcars

Bob Purton

  • Prolific Poster
  • *****
  • Posts: 5154
    • Inter microcar
Re: Villiers exhaust pipe.
« Reply #7 on: August 29, 2012, 06:53:15 PM »
Great! Many thanks Jean.

richard

  • Rich
  • Prolific Poster
  • *****
  • Posts: 4566
  • Bond ,Gordon,Bruetsch
Re: Villiers exhaust pipe.
« Reply #8 on: August 29, 2012, 07:35:43 PM »
bob i asked mike hele in person last week for you - when we were both on the bond rally on isle of wight . please dont ask him as well as i said it was for mine . he only wants to sell , understandably , to bond owners
outside of a dog a book is mans best friend. Inside of a dog it's too dark to read .Groucho Marx 1895-1977

super-se7en (Malc Dudley)

  • Quite Chatty
  • ****
  • Posts: 191
  • Two Frisky sports
Re: Villiers exhaust pipe.
« Reply #9 on: August 30, 2012, 09:16:28 AM »
I have a pair of new 4T downpipes that are spare but do not know if one of them would fit. Could send measurements if you are interested.

Bob Purton

  • Prolific Poster
  • *****
  • Posts: 5154
    • Inter microcar
Re: Villiers exhaust pipe.
« Reply #10 on: August 30, 2012, 12:20:20 PM »
I'm interested but I dont know if measurements would help, I'm thinking of the angle with which the pipe joints the barrel and if it would be the same on both engines. What diameter are they to start with?  Thanks, Bob

super-se7en (Malc Dudley)

  • Quite Chatty
  • ****
  • Posts: 191
  • Two Frisky sports
Re: Villiers exhaust pipe.
« Reply #11 on: August 30, 2012, 12:47:40 PM »
The pipe has an outside diameter of 1 1/2".
With the pipe in its working position, the vertical dimension from the centreline of the pipe to the centre of the port is approx 11"
Looking in plan view, the offset from centreline to centreline is approx 3/4"
Hope this helps. 

richard

  • Rich
  • Prolific Poster
  • *****
  • Posts: 4566
  • Bond ,Gordon,Bruetsch
Re: Villiers exhaust pipe.
« Reply #12 on: August 30, 2012, 01:40:12 PM »
Will look at my 2T pipes and my single engine to compare tonight bob
outside of a dog a book is mans best friend. Inside of a dog it's too dark to read .Groucho Marx 1895-1977

Bob Purton

  • Prolific Poster
  • *****
  • Posts: 5154
    • Inter microcar
Re: Villiers exhaust pipe.
« Reply #13 on: August 30, 2012, 06:06:13 PM »
Its the large bore type I am looking for which is 1 3/4" so I guess the 4T isnt the one for me. Thanks for going to the trouble of measuring it up though Malcolm.

richard

  • Rich
  • Prolific Poster
  • *****
  • Posts: 4566
  • Bond ,Gordon,Bruetsch
Re: Villiers exhaust pipe.
« Reply #14 on: August 30, 2012, 07:52:21 PM »
the 2T pipes measure 1 1/2" and the angle and fit is no use at all on the 9E . see pic. 1 the invacar engine comes with just a stub pipe to fit some plumbing i imagine but it measures 1 5/8" which i think is what you are looking for - awaiting a reply bob .
outside of a dog a book is mans best friend. Inside of a dog it's too dark to read .Groucho Marx 1895-1977