RUMCars Forum

General Category => Unusual Microcar Discussion => Topic started by: Big Al on May 13, 2010, 09:34:57 AM

Title: Fiat 126/Reliant Fox Pick up.
Post by: Big Al on May 13, 2010, 09:34:57 AM
About the most none RUM microcar but I have now rescued the unwanted Fiat FSM 126 from a fate worse than scrappage. These cars have gained a following it seems as two people are already after it. I have been offered a Reliant Fox Pickup for it. This actually quite appeals to me as a vehicle. However I hear that once the front ball joint goes the car is little more than scrap as it is peculiar to the Kitten range and now unavailable. Any knowledge? I am not looking for more dead weights to collect so if it is an unusable car then I would rather have the money for a nice clean running 126 and invest it in sorting out something like the Scootacar.

Oh I forgot to mention the same fellow has a Fox Van and Reef Cub.
Title: Re: Fiat 126/Reliant Fox Pick up.
Post by: Kitty76 on May 13, 2010, 10:54:38 AM
balljoints are fully available from both Reliant and the Reliant Kitten Register for around £60 each.Ive had 3 Foxes,they are brilliant workhorses :)
Title: Re: Fiat 126/Reliant Fox Pick up.
Post by: Big Al on May 14, 2010, 11:14:31 AM
Well other than normal issues there would seem little reason to knock the Pick-up. It would seem to be rare and look what happened to Mini Pick-ups. The investagation will continue as I have yet to view the car. Thanks for info.
Title: Re: Fiat 126/Reliant Fox Pick up.
Post by: Kitty76 on May 14, 2010, 11:51:36 AM
only 601 Foxes were ever built,with an around 60-70 left on the road.the main thing to check on them is the condition of the window frames,as they rot out and are not available.

I have a document all about the fox and keeping it on the road etc written by a friend of mine with 3 foxes,one of which he has owned from new,i shall have a go at pasting it up on here for you to read :)