RUMCars Forum

General Category => Unusual Microcar Discussion => Topic started by: Bob Purton on July 01, 2008, 09:02:20 pm

Title: Help needed removing villiers clutch!
Post by: Bob Purton on July 01, 2008, 09:02:20 pm

Hi, I'm new to villiers motors. I'm striping down a couple of 11e motors with the intention of using all the best parts from both to make one good un. How does one remove the clutch? The front of the clutch has a large boss with four holes in it, does this boss unscrew by using the four holes and a special tool? Does anyone out there know? Any help appreciated.

Title: Re: Help needed removing villiers clutch!
Post by: Scootacar_mk1 on July 15, 2008, 10:20:13 pm

yes there is a special tool for this using the four holes you have mentioned

Title: Re: Help needed removing villiers clutch!
Post by: Bob Purton on July 15, 2008, 11:04:29 pm

Thanks Scootacar MK1, Someone still loves me! So its a special spanner job then. I'll proberbly end up making the tool as I have never seem one on offer.