RUMCars Forum

General Category => Unusual Microcar Discussion => Topic started by: Bob Purton on August 01, 2008, 11:44:12 am

Title: Mk2 scootacar question.
Post by: Bob Purton on August 01, 2008, 11:44:12 am

Are there any Mk2 owners out there? What I need to know is the two drive sprocket sizes, gearbox [not internal engine sprocket]  and final wheel drive. This is for an 11e powered one. If you have a mk2 and could count the teeth for me I would by most grateful.

Title: Re: Mk2 scootacar question.
Post by: Bob Purton on August 09, 2008, 10:19:59 pm

I just wanted to revive this question as there have been no replies. Any Mk2 scootacar owners out there?

Title: Re: Mk2 scootacar question.
Post by: Jim Janecek on August 12, 2008, 03:28:34 pm

a friend of mine who owns one in Florida scanned that section of the MK2 manual it has nothing about the gear in the gearbox, but the final drive is supposed to be 41 teeth 1/2" pitch

I don't know the actual "size" of the chainwheel though..

Title: Re: Mk2 scootacar question.
Post by: Bob Purton on August 12, 2008, 07:59:28 pm

Thanks for that Jim. It sounds the same as the Mk1 then. 19 and 41, unless anyone knows different?