RUMCars Forum

General Category => Unusual Microcar Discussion => Topic started by: NickPoll on February 22, 2012, 09:31:51 am

Title: Isetta engine parts needed
Post by: NickPoll on February 22, 2012, 09:31:51 am

Hello all,
     I'm building up an Isetta engine from parts and sectioning it on my milling machine as a display engine. I need a few parts and wondered if anyone has them spare. I don't mind if the parts are damaged as they may be sectioned and it will never run of course. I need the following:
2 x pushrods, rockers & head bolts, fan, advance mechanism & fixing bolt, domed fan cover, cast bit that clamps the rocker covers in place. I know I have some of these parts somewhere, but I can't find them.   Nick.

Title: Re: Isetta engine parts needed
Post by: Jonathan Poll on February 22, 2012, 12:37:26 pm

Quote from: NickPoll on February 22, 2012, 09:31:51 am

Hello all,
     I'm building up an Isetta engine from parts and sectioning it on my milling machine as a display engine. I need a few parts and wondered if anyone has them spare. I don't mind if the parts are damaged as they may be sectioned and it will never run of course. I need the following:
2 x pushrods, rockers & head bolts, fan, advance mechanism & fixing bolt, domed fan cover, cast bit that clamps the rocker covers in place. I know I have some of these parts somewhere, but I can't find them.   Nick.

Dad, you posted this in the wrong topiuc, this should be under "RUMcar Mart", Jim can probably move it.

Anyway, we also need a few more pieces including an Ydral 125 (could be a 175, but I htink its a 125) dynastart side casing.

Title: Re: Isetta engine parts needed
Post by: Bob Purton on February 22, 2012, 01:26:04 pm

Thats interesting, I never knew Ydral used a dynastart. Or did you mean the flywheel cover?

Title: Re: Isetta engine parts needed
Post by: Jonathan Poll on February 22, 2012, 06:01:25 pm

Quote from: Bob Purton on February 22, 2012, 01:26:04 pm

Thats interesting, I never knew Ydral used a dynastart. Or did you mean the flywheel cover?

That because they dont!

I really need to boost on my microcar facts ;)

Title: Re: Isetta engine parts needed
Post by: Bob Purton on February 23, 2012, 12:13:00 am

So what is the part you are looking for then?

Title: Re: Isetta engine parts needed
Post by: NickPoll on February 23, 2012, 08:55:39 am

Hello Bob,
          The Ydral part Jonathan is on about is a magneto flywheel & cover. I was given this siezed motor by a friend who works in a scrap yard here. My plan is  to section it in the future. I'm not sure what it came from, but it has no forced cooling, so must be a bike. If you want me to send you a photo let me know. It may be of use to you before it gets the chop !               Nick.

Title: Re: Isetta engine parts needed
Post by: Bob Purton on February 23, 2012, 09:36:22 am

Hi Nick. Yes, I would be grateful for a photo.

Title: Re: Isetta engine parts needed
Post by: Big Al on February 23, 2012, 09:37:31 am

Could I interest you in half a wedding dress?

Looks like Jim will have to get his little keyboard mounted hammer out.