RUMCars Forum
General Category => Unusual Microcar Discussion => Topic started by: Jim on September 16, 2013, 04:45:04 pm
-
Wondering if any of you lot have got any experience with 2k paint in a spray can, Just got myself some of the paint I have had my Bond sprayed in I got it on line as 2K paint in an aerosol I`m going to use it on small parts, please be assured I know its dangerous stuff so will take precautions but I`m wondering about how long the spray paint in the aerosol will last once I`ve set the activator off by pulling and twisting the rod on the bottom of can, do I need to use all the paint there and then or can I just use a small amount at different times. :D
-
I've used a lot of 2k in a can. Air dry though. No activator. Were you joking about twisting a knob on the can? I have never heard of this.
-
Hi Bob, I kid you not the instructions say remove cap and insert metal ring provided pull fully out and twist 360 to release activator (http://i201.photobucket.com/albums/aa195/Charlesdegall/Bond%20Minicar%20MKG/AA_zps7f52dbae.jpg) Have just done some research on line and it seams once the activator is released the product will last only 24 hours in the can.
-
Well that makes sense as its a chemical reaction. Must admit this is a new one on me but what a fantastic idea!
-
Hi Bob, I kid you not the instructions say remove cap and insert metal ring provided pull fully out and twist 360 to release activator
After doing that, I would listen carefully to see if it has started ticking.......