RUMCars Forum
General Category => Unusual Microcar Discussion => Topic started by: richard on August 16, 2014, 05:10:09 PM
-
I have never seen a Frisky from this angle - lovely :)
-
Hi Richard
Thats not a FriskySport its a Frisky Family Three that has had the roof removed and Frisky Sport screen and hood grafted on.
Its very well done, but now neither one thing or the other. No longer a Family Three and not a FriskySport.
I know its up to people to do as they want with their cars but with so few left it seems a shame to use such a rare car to create a "special", Very pretty but not a FriskySport.
John
www.meadowsfrisky .co.uk
-
very nice vehicle agreed with nice colour too but I agree as im an enthusiast for an original spec machine to keep its original heritage .. but do like to see these types of vehicles on the road to show history
-
thanks John as you know I dont know my Friskys ;) anyway lovely looking car , the colour and for me just the camera height was a bit different
-
Is this the Canadian 3 wheeler that was done to a high, but questionably guided standard, by the Italian fellow in Canada that I got my real Sport from?
-
Here is a different angle, our Sport next to a 2015 Jaguar at a local Britidh Car Show.
-
I don't think so didn't you get your Sport project from the automobile writer Norm Mort?
John
Ps could you sort out Ray for the dubonnet friction plates
-
here'a different angle of my Frisky Coupe !!!!!(http://i1234.photobucket.com/albums/ff402/Friskyman/FriskyCoupe.jpg)[/URL]
john
-
I don't think so didn't you get your Sport project from the automobile writer Norm Mort?
John
Ps could you sort out Ray for the dubonnet friction plates
I thought that Norm was a friend of his that was some how acting in an intermediary capacity.
Thanks, I already received the excellent reproduction friction shocks for my Sport.
Now that I have returned victorious from the Concourse DE Lemons, I will return to my FF3 project.
This means that I will need Mini shocks to replace the less than satisfactory stock front units. Exactly which ones am I looking for?
Do you know of a good source for these?
-
Steve,
Your front suspension has already been modified,
If you want to do it again full details can be found in Frisky Family Three "tech Misc" page 5.
John
PS Sorry about the size of that photo of my Coupe I haven't quite got the hang of posting photos yet!!!!
-
Looking at the chassis picture, specifically the front of it, and you can see the temptation of using an Isetta Chassis in the absence of the real one. The form is of a generally similar shape, 10 inch wheels and so on. Yet in fact just about anything that can be different, is. Anything can be done but a source of Meadows approved Chassis would be rather handy.
Are Mini dampers correct spec for use on a Frisky? They are designed for Moulton rubber suspension and damp on the extension of the damper, like a Messerschmitt damper. Surely only a double damping unit will work on a Frisky, which needs the damping on compression of the damper.
-
Perhaps that explains the symptom that induces my intention of correction.
That being that even upon accepting just a 175 lb weight whilst the car is not rolling- either front corner of the car can be seen and felt to droop suddenly, and seemingly without resistance, and then show no subsequent tendency to recover normal ride height.
I am so glad to have the resources of John and Al available here for helping resolve this.
This is one of the best examples of what a good forum can provide. :)
-
Steve
Mini shocks work just fine on the Mk1 Family Three, if you want to do them again heres the info but I would be inclined to leave well alone
The original Family three front shock absorbers did not work they lock up after only a short mileage it is recommended that they are replaced with the following components-----
The front shock absorbers, part number QAH127093 S-ABS Mini. Can obtained from motor factors Davmac Spares Ltd of Nottingham (Tel 0115970 3222) They do two shocks under the same part number one is imperial and the other metric. It is important that you get the 1.5 inch dia imperial ones the metric are too wide and will not fit.
The rods will have to be modified to suit the Frisky. The rod will be too long and will need shortening to match the old shocks and the thread extended by the same amount up the rod.
The front springs to go with these shock absorbers are Ref No G6119 Frisky Spring (D124/11)and are made at Springcoil Ltd Sheffield Tel. 0114 273 1111
The original units were Armstrong AT6/7 S.6187 Type C (with minor mods)
Note -- do not force open the alloy cups as they will crack likewise do not over tighten then or they will crack.
Ok thats your Sunday afternoon sorted
John
www.meadowsfrisky.co.uk
-
Might be they are double acting units, some more expensive ones were. They will a still dampen even if one way, but not on the initial impact. The damper should not prevent the spring from regaining its ride height either way. But poor alignment, the problem at the beginning of the mod, would. Sounds like at least a check over is warrented.
-
I think the topic of this thread has probably jumped slightly off course here moving from frisky sport to mini shocks and frisky chassis
-
Actually my post was more on the theme of seeing cars from different angles but hey go with the flow ;) perhaps inspired by that lovely photo Bob posted of his Inter at the rugby club- sometimes it's all in the angle ;)
-
Sorry, I am not overly interested in looking at them, or collecting pictures of other peoples cars, I'd rather get them going. My mistake. You both know how to reach me guys.
-
I think the topic of this thread has probably jumped slightly off course here
The mission statement of Rumcars is to both keep records, and encourage the restoration and preservation of unusual microcars.
Messyman, Al and John- you are all over achievers in the best sense of the word in terms of getting these cars back to operational status. Yet you each have your own individual blend of strengths that you offer generously to the rest of us under achievers in different ways.
We generally do not demonstrate enough appreciation for our hero's efforts.
Please don't let that fact or a television actor's disingenuously inspired attack, or any reactive attempt to maintain political correctness in the aftermath of this to shed any negative light on your offerings that help restore and preserve our cars.
Your actions are right on target with Rumcars' mission statement.
Your words understandably less so considering your relative newbie status on this forum.
I can now make this statement with greater authority as it is my first post as a "Prolific Poster".
Never mind that I was one to suggest our switching to this terminology. ;D
-
I think the rumcars mission is still well on course! Its always good to see specialized knowledge disseminated on the forum, its what its all about but there are quitter periods where a photo or a chat about a TV programme can fill in the gap.
I'm as guilty as the next man of wandering off topic but there is a lot to be said for starting a new thread when one topic leads on to another. For one it makes it easier to find something discussed previously. Say for example you want to refer to this discussion on Frisky suspension, if you were searching for it in months to come you wouldn't really expect to find it under " Frisky seen from a new angle" but if under "Frisky suspension" you would be onto it right away. Just a thought.
-
Any more of that from Steven we will have to start a sycophants corner ;D
-
It beats being in your psycho fantasy corner. ;D ;D
-
Now now ladies!
-
lol it wasn't a dig regarding the off course the topic was or wasn't going but it so funny how it changes...... oppolgise to any 1 offended but if so ...dry you eyes lol