RUMCars Forum
General Category => Unusual Microcar Discussion => Topic started by: micro marshall on June 29, 2015, 10:40:24 PM
-
Witch ignition coil is the correct one for a peel p50 with a zweirad union 804 engine? i think it is the first one but i thought i better ask before i start buying parts. ;D
http://www.zweirad-union-mopeds.de/en/spareparts/engine-parts/ignition/ignition-coil/557/lichtspule-fuer-victoria-siba-mzlv-17w-anlage
http://www.zweirad-union-mopeds.de/en/spareparts/engine-parts/ignition/ignition-coil/556/lichtspule-fuer-victoria-siba-mzlx-17w-anlage
-
Hi Jamie. I'm no expert on Peels but does your car have another seperate ignition coil outside of the flywheel or does the HT [sparkplug] lead come straight out of the engine and onto the plug?
Looking at the coils you show, the first one looks like the type that feeds an outside coil , the second is a flywheel magneto coil that feeds the spark plug direct.
Dont know if this helps?
-
It dose have a external coil in the car, so it dose have a external HT lead from the coil to the spark plug. ;)
-
Then I would say its the first one as you suggested. Make sure its not a lighting coil though as they look pretty similar.
ps, It makes a change to have Real Peel issues discussed on the forum! Keep it up Jamie.
-
I was sorely tempted to make a fake answer. How many would have noticed?
-
I don't know about witch ignition coil is required but perhaps wizard might be a help
-
Roy Wood, microcar owner.
-
He would be " made up " ;)
-
Get some pictures up