Author Topic: Help needed removing villiers clutch!  (Read 2459 times)

Bob Purton

  • Prolific Poster
  • *****
  • Posts: 5041
    • Inter microcar
Help needed removing villiers clutch!
« on: July 01, 2008, 09:02:20 pm »
Hi, I'm new to villiers motors. I'm striping down a couple of 11e motors with the intention of using all the best parts from both to make one good un. How does one remove the clutch? The front of the clutch has a large boss with four holes in it, does this boss unscrew by using the four holes and a special tool? Does anyone out there know? Any help appreciated.

Scootacar_mk1

  • Quite Chatty
  • ****
  • Posts: 159
Re: Help needed removing villiers clutch!
« Reply #1 on: July 15, 2008, 10:20:13 pm »
yes there is a special tool for this using the four holes you have mentioned
Cream Mk1 Scootacar

Bob Purton

  • Prolific Poster
  • *****
  • Posts: 5041
    • Inter microcar
Re: Help needed removing villiers clutch!
« Reply #2 on: July 15, 2008, 11:04:29 pm »
Thanks Scootacar MK1, Someone still loves me! So its a special spanner job then. I'll proberbly end up making the tool as I have never seem one on offer.